Sitemap

Know About Life

How to Remove 2000 Jeep Rotors

2012-05-25   Views:0

Advertisement

When the disc brakes on your Jeep start to go out, the brake pads' wear indicators will start to squeak. Don't just change the pads to stop the squeal; you also need to replace or turn the rotors. This will give your new pads a fresh, flat surface to

How to Remove 2000 Jeep Rotors

When the disc brakes on your Jeep start to go out, the brake pads' wear indicators will start to squeak. Don't just change the pads to stop the squeal; you also need to replace or turn the rotors. This will give your new pads a fresh, flat surface to contact, making pads and rotors work in harmony. In this case, the project vehicle is a 2000 Jeep Grand Cherokee, but the process is similar for other Jeep vehicles, and removing the rotors to replace them or turn them isn't difficult.

Skill level:Moderately Easy

Things you need

JackJack standsTire ironSocket wrench setHeavy-duty wireFlathead screwdriverCotter-pin pullerPliers

Instructions

1 Use the jack to lift the front of the vehicle, then set it on the jack stands. Make sure the vehicle is completely and solidly on the stands before you work on it. Remove the front wheels, using the tire iron, and set them aside from your workspace. Only the front wheels of the Grand Cherokee have disc brakes.

2 Disconnect the two bolts securing the brake caliper to the front steering knuckle with the socket wrench, then use the heavy-duty wire to suspend the brake caliper from the front suspension so there is no tension on the brake line.

3 Pry off the dust cap on the centre of the brake rotor, using the flathead screwdriver. Flatten the cottar pin in the middle of the rotor with the pliers, and pull it out of the castle nut on the brake rotor with the cottar-pin puller.

4 Unbolt the centre bolt on the brake rotor with the socket wrench. Grip the rotor on both sides with your hands, and pull it off the hub.

5 Replace or turn the rotor as recommended, then repeat the process for other rotor.

How to Remove 2000 Jeep Rotors

How to Remove 2000 Jeep Rotors

Category:HobbiesRelease time:2012-05-25Views:130

When the disc brakes on your Jeep start to go out, the brake pads' wear indicators will start to squeak. Don't just change the pads to stop the squeal; you also need to replace or turn the rotors. This will give your new pads a fresh, flat surface to[More]

How to Remove the Brake Rotor on a 2003 GMC 2500

How to Remove the Brake Rotor on a 2003 GMC 2500

Category:HobbiesRelease time:2012-09-29Views:130

The brake rotors on a 2003 GMC 2500 are one of the most important safety features the vehicle has. Brake rotors are specially designed, heat-resistant metal discs that absorb the heat and friction caused by the brake pads pushing up against them to s[More]

How to Remove a Jeep Center Console

Category:HobbiesRelease time:2013-09-01Views:130

The centre console of your Jeep is a convenient piece of your vehicle's interior. The centre console usually fits around your Jeep's shifter and emergency brake lever. Depending on the year and model Jeep, the centre console will also usually contain[More]

How to Remove the Rear Rotors on a Chevy Silverado

How to Remove the Rear Rotors on a Chevy Silverado

Category:StyleRelease time:2013-12-02Views:130

The rear brakes on some model-years of Chevrolet Silverados feature disc brakes. These brakes have rotors which spin with the axle shafts. Over time, these brake rotors can wear down and develop grooves in them. When the pads eventually wear down, it[More]

How to Remove a Jeep Dash

How to Remove a Jeep Dash

Category:HealthRelease time:2014-07-10Views:130

Chrysler has been manufacturing all models of Jeep since 1941, making it the oldest brand of off-road vehicles. You may need to access something behind the dashboard on your Jeep, or even replace it entirely due to damage. The good news is that you c[More]

How to Remove a Rear Rotor on a Ford F-150

How to Remove a Rear Rotor on a Ford F-150

Category:HobbiesRelease time:2014-11-01Views:130

Removing the rear rotor from a Ford F-150 is not any different than removing the rear rotor from any other truck. The rear rotor is housed behind the rear wheel, and the brake caliper sits on top of the rotor. The rotor is what the brake pads squeeze[More]

How to Remove the Rear Rotors on a Jeep Liberty

How to Remove the Rear Rotors on a Jeep Liberty

Category:HobbiesRelease time:2016-09-21Views:130

The front brakes do the bulk of the stopping on a Jeep Liberty, but the rear brakes share the load as well. The rear brakes also are the source of the parking brake, which keeps the car steady when parked. Brakes need replacing after time, and when t[More]

How to Remove a Jeep Wrangler Unlimited Hard Top

Category:HobbiesRelease time:2012-01-08Views:130

Removing the hardtop from your Jeep Wrangler Unlimited can be a lot of fun in the warm weather. With the top off, you can fully enjoy the open-air feeling of owning a Jeep and letting the wind blow through your hair. The top comes off in three sectio[More]

How to Remove the Front Rotors on a Toyota Tacoma

How to Remove the Front Rotors on a Toyota Tacoma

Category:HealthRelease time:2012-02-03Views:130

The rotors on your Tacoma should typically last through three sets of brake pads. That does not account for severe driving conditions, however, such as continuous towing or everyday travel on mountainous roads. You will often notice the first signs t[More]

How to remove a jeep wrangler's interior door handle

Category:HobbiesRelease time:2012-03-23Views:130

The Jeep Wrangler uses a pull style interior door handle which is easily removed from the door if you need to replace the handle or take the interior panel off the door. The handle assembly has several actuator rods on the back of it that work the la[More]

How to Remove a Rear Rotor on a Ram 2500

Category:HobbiesRelease time:2012-03-31Views:130

The brake rotors on a Dodge Ram 2500 are responsible for slowing the vehicle to a stop. After many miles of braking, the rotors will start to form grooves and marks from normal use. When it comes time to change the brake pads, you'll also want to rem[More]

How to Remove Disc Brake Rotors on a Toyota Matrix

Category:HobbiesRelease time:2012-06-13Views:130

The brake rotors on a Toyota Matrix are an extremely important aspect of the brake system. Over time, the rotors, which are the round disc that the caliper and brake pads clamp when the brakes are applied, can get scored, warped or simply wear too th[More]

How to Remove the Brake Rotor on a Chevrolet Cobalt

How to Remove the Brake Rotor on a Chevrolet Cobalt

Category:HobbiesRelease time:2012-07-04Views:130

The Chevrolet Cobalt employs an anti-lock braking system that is designed to exceed governmental standards for vehicle safety. To meet those standards, the components of the braking system need to be in proper working form. Rotors that are scored can[More]

How to remove a 4runner rotor

Category:HobbiesRelease time:2012-08-02Views:130

Removing the front brake rotor from your Toyota 4Runner involves removal of the brake caliper and a few associated parts. The job can be completed with basic hand tools, and a new rotor can be purchased from the Toyota dealership or from most auto pa[More]

How to Remove the Brake Rotors From a 1994 Ford Ranger

Category:HobbiesRelease time:2012-08-16Views:130

The 1994 Ford Ranger comes standard with four-wheel disc brakes. While the brake pads are the most common problem with the braking system, needing replacement most often, occasionally the rotor will get scratched or worn down. When this happens, you[More]

How to Remove the Brake Rotor On My 1999 Nissan Maxima

How to Remove the Brake Rotor On My 1999 Nissan Maxima

Category:HobbiesRelease time:2012-11-26Views:130

If you feel a vibration when you are braking, you may need to remove the rotors on your 1999 Nissan Maxima. You may take them to a mechanic to have them machined to remove any warping issues in the rotors. Otherwise, you may have to replace them. It[More]

How to Remove a Brake Rotor from a 2003 KIA Sorrento

Category:HobbiesRelease time:2013-01-03Views:130

Part sedan, part sport utility vehicle, the Kia Sorento brings together the best of both worlds. The Sorento sports 17-inch alloy wheels with four wheel disc brakes. The brakes should be serviced on your Sorento at least once every 60,000 to 70,000 m[More]

How to Remove the Front Rotors of a 2006 GMC Sierra

How to Remove the Front Rotors of a 2006 GMC Sierra

Category:HobbiesRelease time:2013-04-22Views:130

The front brake rotors on a 2006 GMC Sierra can get warped over time. The purpose of the rotors is to give the brake pads something to apply pressure to when the brake pedal is pressed. A warped rotor will make the truck vibrate when braking and coul[More]

How to Remove a Jeep Wrangler Ignition Switch

Category:HobbiesRelease time:2013-06-25Views:130

Removing the ignition switch from your Jeep Wrangler may be necessary to access other components within the steering column. There are many electrical components all hidden under the plastic steering column covers and some of them are buried under ot[More]

How to Remove the Brake Rotors on a 1999 Hyundai Elantra

How to Remove the Brake Rotors on a 1999 Hyundai Elantra

Category:HobbiesRelease time:2013-06-27Views:130

First introduced in 1991, the 1999 Hyundai Elantra came equipped with a 2.0-litre in-line four-cylinder engine that produced 140 horsepower and 133 foot-pounds of torque. The 1999 Elantra came with front disc brakes and rear drum brake as standard eq[More]

Hot
Gypsum plaster is usually called "plaster of Paris." Gypsum plaster was an important commodity in Paris for centuries because Paris is built over gypsum beds. Gypsum and lime plasters were used to stucco the exteriors of peasant huts, Mayan temples, [More]
A birthday doll cake provides the birthday child with a creative cake to enjoy at a party and an extra doll birthday present to bring home when the cake has been eaten. The cakes are easy to make and can be completed in three to four hours time. Skil [More]
Redwood is highly prized for its beautiful lumber, but sometimes may be cut for firewood. If you are considering this variety to heat your home, you should know what to expect before you begin to use it. Heat Redwood produces a moderate amount of hea [More]
Metal figures are a creative form of expression that represent the modern age. The majority of inventions we use on a daily basis involve metals or forms of metallic compounds. It is no surprise that these advents of technology have brought about a v [More]
At times, you may wish to cut a curve into a ceramic floor tile. You may be tiling around a toilet stack or a curved kitchen island. You may also be inlaying another tile to form a decorative design. Regardless of the reason, getting a clean curve ca [More]
Nexxtech is an electronics brand that creates a large number of items, including a variety of headphones for personal audio usage. Most of their headphones have a volume control on the headphone wire and connect to an audio port using a cord and the [More]
Masks can be made at any time of year for any occasion. Most people think of masks during Halloween, but school projects or plays often require masks, as do some parties. Making a horse mask is not that difficult and can be made out of ordinary house [More]
If you want hair extensions but can't find any in the specific colour or length that you need since it's hard to find them over 60 cm (22 inches) long, you can try making your own pre-tipped hair extensions. Pre-tipped hair extensions are tipped with [More]
Snap fasteners are found on a variety of items such as luggage, tarps, trailers, tents and clothing. A snap-fastening tool helps install snaps on new items or replace broken snaps. Each side of a snap has two parts, for a total of four pieces. One si [More]
Bible games are a fun way for Sunday school students to learn Bible verses as well as the best ways to put the Bible's teachings in action. When planning Bible games for fourth grade students, choose hands-on activities for your Sunday school class t [More]